View previous topic :: View next topic |
Author |
Message |
mario Site Admin
Joined: 03 Oct 2006 Posts: 7182
|
Posted: Wed Jun 15, 2011 11:40 am Post subject: Multi-win groups coming soon |
|
|
Multi-win groups are almost ready to be released. The feature has been tested and it looks good, but since Gixen's QA department is quite limited (=just me), and is also quite involved in software development and administration, I am looking for volunteers to further test the feature. The risk is small, but it exists, so it's best tested with "dollar" items.
If you are willing to assist, please email me with your username, and I will enable the feature for your account.
What are multi-win groups? It's a new type of snipe group that allow you specify more than one item in a group to be won. E.g. you can have 5 items in a group, but you wish to win 2. |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Thu Jun 16, 2011 6:33 am Post subject: |
|
|
If I first set a group to win 2 items, then add three items to that group all is fine.
Then I modify that group to have 3 items and add a few more.
The result is I have a group with a mixture of 2 and 3 items to win.
I'm not sure what is going to happen as the auctions finish.
Maybe this is what we want?... It probably gives more functionality than modifying the number to win on the existing snipes when it is changed.
However it could also be regarded as somewhat confusing. _________________ Mark |
|
Back to top |
|
|
mario Site Admin
Joined: 03 Oct 2006 Posts: 7182
|
Posted: Thu Jun 16, 2011 6:38 am Post subject: |
|
|
I don't think so, I will disable modifications on number of items per group if there are any existing bids under that group scheduled. I intend to do it, but didn't do this just yet.
But as it is now, what will happen is that the first item that is won will determine how many items are won (e.g. if the setting was 2 items at the time that item was scheduled, it will be two). |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Thu Jun 16, 2011 9:16 am Post subject: |
|
|
Ah, OK I thought it might give flexibility to increase the number of auctions won 'if you are on a roll'... or reduce the number won if you were winning too many (and hence probably bidding too much)... But your solution sounds like a good one if it is only ever going to be the first snipe that wins that dictates the number to be won because that could lead to unpredicatable results.
No real issues so far, I've got more testing to do yet though. _________________ Mark |
|
Back to top |
|
|
Gixen Advertisements
|
Posted: Thu Jun 16, 2011 9:16 am Post subject: |
|
|
|
|
Back to top |
|
|
mario Site Admin
Joined: 03 Oct 2006 Posts: 7182
|
Posted: Thu Jun 16, 2011 9:31 am Post subject: |
|
|
There is a warning against changing these values while existing group snipes are scheduled. I might consider preventing this in the code nevetheless. |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Thu Jun 16, 2011 9:46 am Post subject: |
|
|
mario wrote: | There is a warning against changing these values while existing group snipes are scheduled. I might consider preventing this in the code nevetheless. |
Oh, so there is... was that always there or just since I started trying to break it?
I don't tend to read the warnings/instructions on software until it bites me ... and then when it does I find I can't complain because there was a statement telling me not to do what I just did... I think it is a 'man thing' _________________ Mark |
|
Back to top |
|
|
mario Site Admin
Joined: 03 Oct 2006 Posts: 7182
|
Posted: Thu Jun 16, 2011 9:50 am Post subject: |
|
|
It was always there . That means I should probably prevent changes in the code. |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Thu Jun 16, 2011 10:07 am Post subject: |
|
|
Maybe I read it subliminally and that's why I tried doing it
I wouldn't worry about preventing it in software just yet... I don't imagine those that use it are as stupid (or hell bent on breaking it ) as I am _________________ Mark |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Fri Jun 17, 2011 4:13 am Post subject: |
|
|
OK I have a new question relating to how the Group gets reset to having won no items.
I have a Group configured to win two items.
First question: Presumably I can keep adding to that Group even after I win the first item?... Or does that reset it to win another two?
I assume that after I win two on that Group it is reset to a Group ready to win another two? ... No problem with that.
Second question: However, suppose I give up trying to win two 'Gadgets' after winning only one and want to use that Group to win two 'Widgets' instead... if I change the Group members to have 'Widgets' in instead of 'Gadgets' after I've won a single 'Gadget' should I be expecting to win one or two of them?
Does that make sense?... I'm sure I could be a bit more precise if I thought about my wording more carefully. _________________ Mark |
|
Back to top |
|
|
fonaticalbuyer Guest
|
Posted: Sat Jun 18, 2011 2:37 am Post subject: |
|
|
Dear All,
Is this a Mirror-only feature at the moment?
I just tried setting up half a dozen small-value tests [specifying a quantity] wih my non-mirror-subscribing account and can't see any mention of quantity on the 'Schedule Bids' screen.
The bids have been entered & grouped fine.
Steve |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Sat Jun 18, 2011 3:34 am Post subject: |
|
|
Yes, it will be for Mirror subscribers only.
At the moment, while it is being tested, you will also need to ask Mario to enable it on your account.
It will be enabled and configured from the Settings page. _________________ Mark
Last edited by Cupid on Sat Jun 18, 2011 3:53 am; edited 1 time in total |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Sat Jun 18, 2011 3:52 am Post subject: |
|
|
Cupid wrote: | First question: Presumably I can keep adding to that Group even after I win the first item?... Or does that reset it to win another two? |
OK, I have a partial answer to this, when you win an auction in a multi win Group the number to win is reduced by 1 on all the other snipes in that Group. Fair enough we do need some indication on the snipes page of the current state of the Group and this provides that.
If I add more snipes to the Group at this stage (after I have won the first) the new snipes have the original Group value (2 in this case) as the number to be Won... however presumably this is incorrect and I should only expect to win one more auction since (based on your reply to my first enquiry) the first snipe that won sets the number to be won for the rest of the Group? .. Or is it that you have to add all the snipes to the Group before winning the first otherwise unpredictable results will occur?... If so, I think that is counter intuitive and will cause confusion.
I think we are going to need a method of resetting a Group so that it is back to the initial state (as if none had been won yet). I have so far thought of a couple of ways this might be done, (i) a Reset button on the Settings page for each Group or (ii) perhaps we could combine this with the other suggestion of being able to set Group names, and when a Group name was changed it would reset the Group since that would be an indication that the user was now looking for something different than when they won the first item(s). _________________ Mark |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Sat Jun 18, 2011 5:18 am Post subject: |
|
|
Having thought about it some more... I think that adding a new snipe to a Multi Win Group should set either the set number of items to win for that Multi Win Group, as it does now, if there are no other active snipes scheduled for that Multi Win Group, otherwise it should set the number of items to win for the new snipe to the minimum number of items to win for the other snipes already scheduled for that Multi Win Group.
I think this could address all the issues I currently have, negating the need for a reset button/mechanism because the way you do that is to delete all the items in the Multi Win Group and start again and it should allow the snipes page to continue to reflect the true state of the Multi Win Group at any particular time. _________________ Mark |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Sat Jun 18, 2011 11:30 am Post subject: |
|
|
Cupid wrote: | is it that you have to add all the snipes to the Group before winning the first otherwise unpredictable results will occur?... If so, I think that is counter intuitive and will cause confusion. |
OK, I have now answered this question... yes, the results are currently unpredictable... so I think it is essential for the suggestion I made in my last post to be implemented before this feature is provided to all Mirror subscribers.
I think I am getting the hang of how this is implemented, there is no instance of an active Multi Win Group... it operates from the Number of Items To Win stored on a specific snipe when that item is won... doesn't it?.. and that value is decremented by all earlier wins until it is 1 and then when there is another win all the later snipes in that group are cancelled. _________________ Mark |
|
Back to top |
|
|
mario Site Admin
Joined: 03 Oct 2006 Posts: 7182
|
Posted: Sat Jun 18, 2011 6:56 pm Post subject: |
|
|
Mark, you got it all right. |
|
Back to top |
|
|
fonaticalbuyer Guest
|
Posted: Sat Jun 18, 2011 11:12 pm Post subject: |
|
|
Hi Mario,
Would you be able to enable Multi Win on my Mirror account please (fonaticalbuyer)?
Also the 'Quantity' option relating to Multi-Win seems to be available in Autosnipe [FireFox] regardless of which level of account (Mirror / Standard) is in use. Might be confusing for non-Mirror users to see a feature which isn't applicable to their accoutn level.
Looking forward to giving this some serious testing.
Regards,
Steve |
|
Back to top |
|
|
fonaticalbuyer Guest
|
Posted: Sat Jun 18, 2011 11:15 pm Post subject: |
|
|
...Oh and while I think of AutoSnipe in conjunction with Multi Win Groups; I appreciate this is far too early in its evolution for me to comment but evidently it's not about to stop me.
The AutoSnipe screen allows me to specify a Quantity and my Bid Group. So I can add an item with quantity '10' and place it into Group 1. Can I then add another item into Group 1 with a different 'Quantity' (it appears so), in which case which Quantity value is respected by Gixen?
Regards,
Steve |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Sun Jun 19, 2011 4:16 am Post subject: |
|
|
fonaticalbuyer wrote: | Also the 'Quantity' option relating to Multi-Win seems to be available in Autosnipe [FireFox] regardless of which level of account (Mirror / Standard) is in use. Might be confusing for non-Mirror users to see a feature which isn't applicable to their accout level. |
I think that is a hang over from when eBay allowed multiple items to be listed by sellers on auctions, and is not related to this feature at all. eBay do not have that feature any more and it really should be removed from Autosnipe entirely, as it has been from the web interface.
It is going to be a while before Autosnipe (especially since Kieth maintains it, not Mario) is updated to include this new feature, at the moment it is on the web interface only, not even in the API or the Gixen Desktop Manager. _________________ Mark
Last edited by Cupid on Sun Jun 19, 2011 8:34 am; edited 1 time in total |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Sun Jun 19, 2011 4:22 am Post subject: |
|
|
fonaticalbuyer wrote: | ...Oh and while I think of AutoSnipe in conjunction with Multi Win Groups; I appreciate this is far too early in its evolution for me to comment but evidently it's not about to stop me.
The AutoSnipe screen allows me to specify a Quantity and my Bid Group. So I can add an item with quantity '10' and place it into Group 1. Can I then add another item into Group 1 with a different 'Quantity' (it appears so), in which case which Quantity value is respected by Gixen? |
As per my previous post, this is related to a moribund feature on eBay and not to Multi Win Groups... it will have no effect whatsoever on Multi Win Groups... the feature will have to be implemented from scratch in Autosnipe ... this may never happen since the feature is controlled primarily from the Gixen Settings page... and not when entering a specific snipe which is what Aurosnipe is designed to handle. _________________ Mark |
|
Back to top |
|
|
fonaticalbuyer Guest
|
Posted: Sun Jun 19, 2011 7:47 am Post subject: |
|
|
Thanks Mark, just something I'd never spotted before - sorry for the confusion!
Steve |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Sun Jun 19, 2011 8:33 am Post subject: |
|
|
Not at all, thanks for raising it Steve... I think others might well get confused by that too now that Multi Win Groups are coming in... so we should probably ask Keith to remove it from Autosnipe ASAP.
It was removed as a feature from eBay (they were known as Dutch Auctions) well over a year ago, and from the Gixen web pages soon after that.
Hopefully Mario will enable Multi Win Groups on your account soon and then you can join in the fun _________________ Mark |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Mon Jun 20, 2011 4:12 am Post subject: |
|
|
Cupid wrote: | adding a new snipe to a Multi Win Group should set either the set number of items to win for that Multi Win Group, as it does now, if there are no other active snipes scheduled for that Multi Win Group, otherwise it should set the number of items to win for the new snipe to the minimum number of items to win for the other snipes already scheduled for that Multi Win Group. |
With this enhancement you would also be able to change your warning on the Settings page from
Mario wrote: | Do not change group settings if you have active group snipes, as this may result in an unexpected behaviour. |
to the less alarmist:
Note: This setting will only take effect when you set up a new Group. _________________ Mark |
|
Back to top |
|
|
mario Site Admin
Joined: 03 Oct 2006 Posts: 7182
|
Posted: Tue Jun 21, 2011 5:05 am Post subject: |
|
|
fonaticalbuyer, I enabled multi-win groups for your account.
Quantity in autosnipe (and elsewhere) is no longer used, ebay does not support dutch auctions any longer. Thank you for letting me know, I'll remove it. |
|
Back to top |
|
|
fonaticalbuyer Guest
|
Posted: Tue Jun 21, 2011 7:34 am Post subject: |
|
|
Thanks Mario, I'm due to do a round of buying soon so will feedback anything I come across.
Initial thoughts are that a maximum quantity of 5 items is a little low for my personal needs, albeit I appreciate it's quite reasonable for most people and yes I could always use multiple groups each with five entries!
Regards,
Steve |
|
Back to top |
|
|
mario Site Admin
Joined: 03 Oct 2006 Posts: 7182
|
Posted: Tue Jun 21, 2011 8:44 am Post subject: |
|
|
Steve, that can be increased if needed, not an issue. |
|
Back to top |
|
|
toothbrushheaven Guest
|
Posted: Wed Nov 02, 2011 9:38 am Post subject: bid change on multi-win groups |
|
|
Its nice to see multi-win groups implemented.
I'd like to see an option to change the bid based on number of items won. I.E. I really need one item, and would like a second but only for a good price (not a I'm desperate price). |
|
Back to top |
|
|
mario Site Admin
Joined: 03 Oct 2006 Posts: 7182
|
Posted: Wed Nov 02, 2011 9:46 am Post subject: |
|
|
You can probably achieve that by combining one standalone item and one (regular) group. |
|
Back to top |
|
|
toothbrushheaven Guest
|
Posted: Wed Nov 02, 2011 10:26 am Post subject: bid change on multi-win groups |
|
|
Nice idea, to put an item in different groups. Unfortunately I get the error "Sorry, this item is already present."
If it only checked for duplicates in the same group... |
|
Back to top |
|
|
Cupid
Joined: 09 Aug 2007 Posts: 7759 Location: Bristol, UK
|
Posted: Wed Nov 02, 2011 11:09 am Post subject: |
|
|
Yes you can only have an item listed to snipe once.
I think Mario meant that you would need to update the snipes as you went along... always having the first outside the Group at a higher amount until you won one and the rest within the Group. _________________ Mark |
|
Back to top |
|
|
toothbrushheaven Guest
|
Posted: Wed Nov 02, 2011 1:29 pm Post subject: bid change on multi-win groups |
|
|
Unfortunately, manually to update snipe lists kinda misses half the point of sniping - I don't need to be tied to the web. Sometimes items are closely timed.
I think checking that items aren't duplicated only within a group is the best option. Or, give a warning, not an error, if they are.
Sounds like the only work around to getting additional items in a group, at a lower bid, is to get multiple gixen accounts. Do you know if there is a way to do this without having multiple ebay accounts also? |
|
Back to top |
|
|
mario Site Admin
Joined: 03 Oct 2006 Posts: 7182
|
Posted: Wed Nov 02, 2011 1:38 pm Post subject: |
|
|
No, there is a 1:1 relationship between gixen and ebay accounts.
I am reluctant to implement something like "drop the bidding price when one item won", I sense many complications with that. Even as it is, I am having hard time explaining present options to users.
I were in a situation like that (need one item, not desperate for the second), and if enough items available, I would probably create two groups - one with higher, the other one with lower price. How I would classify them would depend on timing of the auctions, and my availability to make modifications. And I would certainly turn on email notifications. It's not as useful as what you propose, but it will probably work most of the time. |
|
Back to top |
|
|
toothbrushheaven Guest
|
Posted: Thu Nov 03, 2011 6:25 am Post subject: bid change on multi-win groups |
|
|
I think your site is pretty self-explanatory. I've found some end users need screen-shot examples...
I'm dealing with an item with relatively little availability, just two happen to have ended up closing within an hour when I'm not available.
I think the two gixen accounts is the only real option, one with a I'm desperate group, the other account with I'd hate to miss a good deal on a spare.
Thanks. |
|
Back to top |
|
|
mario Site Admin
Joined: 03 Oct 2006 Posts: 7182
|
Posted: Thu Nov 03, 2011 6:32 am Post subject: |
|
|
It's not a good idea at all to use two ebay accounts, as you would end up bidding against yourself. |
|
Back to top |
|
|
|